Tuesday, 9 September 2014

Renaissance Avriti Multistorey Apartments, Located in Mahadevapura, Bangalore offered with 2BHK, 3BHK and 4BHK Apartments.

Renaissance Avriti Multistorey Apartments Area Range 1212-2289 Sq.ft, Located in Mahadevapura, Bangalore offered with 2BHK Apartments, 3BHK Apartments and 4BHK Apartments.

http://bangalore5.com/project_details.php?id=184

Description:

No more locked doors or drawn curtains. Untinted windows. The end of hushed tones. Shades which are never down. Privacy is not hard to find.

We’ve made privacy simple, Which is why when you open a window, all you see are neatly landscaped gardens. (The layout is especially planned so that your windows don’t look directly onto your neighbours.)

Which is why when you open your door, your home is not on display for outsiders. (Each doorway opens into a lobby instead of your living room.)

Which is why if you like to live life at full volume, you can. (There are no common wall between neighbours. You don’t hear them. They don’t hear you.)

The privacy you’ve been looking for all your life Located at ITPL Road Bengaluru, Avriti is your home, your haven. A gated community with 221 apartments; each one carefully designed to ensure that your world is your own.


Often people complain of cracks on walls once application works. application plays a very important role within the construction of a building. even as skin provides form and texture to the body and protects it from the harmful surroundings, plaster protects the building from injury caused by salts, acid and rain within the external surroundings. It conjointly makes the building look stunning and enticing. 

Defect free sturdy plaster, free from cracks or different defects is achieved by diligently following the right construction practices. 

One of the explanations cited for cracks is lack of correct cement sand quantitative relation. Normally, for outdoor plaster, the cement-sand quantitative relation is from 1:4 to 1:5, for internal plaster from 1:5 to 1:6 and for roof plaster from 1:3 to 1:4.

For higher results, confirm the mason uses a 1:4 rations mortar of cement and fine sand. For coarse sand, the quantitative relation is modified to 1:6. but 1:4 mixes is most well-liked for best results. make certain that the mason has not ready the combination all at once for the total day. the combination should be ready solely in little quantities in order that it's used among an hour. If excess mortar is ready, it dries up attributable to evaporation and remixing deteriorates strength and will increase consistency. 

The risk of crazing cracks could also be decreased  by the employment of comparatively weak combine for finishing coat, avoiding excessive proportion of terribly fine material within the end coat and avoiding excessive towelling therefore on forestall the surplus of laitance drawing to the surface. a significant precautional live to be under- taken before application is take away loose mortar and grease from joints. All joints within the masonry ought to be raked resolute a depth of a least twelve millimeter with a hooked tool created for the aim whereas the mortar remains inexperienced and not later than forty eight hours of the time of birthing. Another vital task is that the wall ought to be wetted for some hours. The walls shouldn't be soaked however solely dampened equally. application on wet walls is rarely satisfactory as a result of secret is not shaped between the plaster and also the background surface. a decent secret is essential for successful  rendering and for avoiding cracking and crazing. In a perfect state the background ought to be in saturated surface dry condition. 

Addition of water ought to be rigorously monitored. Excess water can cause shrinkage likewise as low strength of plaster. Waterproof compounds if used ought to be uniformly spread and mixed properly.

When application is finished in 2 coats, the primary coat ought to be left rough and open from fringe of the birthing trowel and once it's been left long enough to line firm, the surface ought to be combed or scraped to make a key for the second coat. the primary coat ought to be allowed to dry for 3 to 5 days before subsequent  coats ar applied.

Use a net mesh whereas application joints between the concrete work and brick-work. Plaster ought to be finished with a wood felt. A steel trowel shall not be used. guarantee continuous solidifying for ten to fourteen days. you will confine mind that the necessity for repairs arises attributable to negligence, use of unsuitable materials and improper construction practices. Therefore, to save lots of your buildings from cracking adopt correct construction practices.



Real Estate Properties are available in Bangalore City.......


No comments:

Post a Comment

Your Comment on this box

Contact Us

Name

Email *

Message *